RDSL 6310 or 6350 Modem
with Inline Filter
Installation Instructions

Step 2 - Get your computer ready
Windows 95 and 98

Dynamic IP (default) | Static IP (special order)

Standard Setup

Turn on your computer (if it’s not already on).
Right-click on the Network Neighborhood icon, located on your desktop.
 

 
Left-click on Properties in the pop-up menu.
In the Network window, scroll down until you find the TCP/IP component for your network interface card (NIC). Double-click on it.
 

 
Click on the IP Address tab if necessary, and select Obtain and IP address automatically.
 

 
Click on the Gateway tab.



 
Verify the Installed gateways field is blank.
Click on the DNS Configuration tab.
 

 
Select Disable DNS.
Click the OK button at the bottom of the panel.
Click OK again and restart your computer.

Next: Set up your email
 

Fixed IP Setup

Turn on your computer (if it’s not already on).
Right-click on the Network Neighborhood icon, located on your desktop.
 

 
Left-click on Properties in the pop-up menu.
In the Network window, scroll down until you find the TCP/IP component for your network interface card (NIC). Double-click on it.
 



Click on the IP Address tab if necessary, and select Specify an IP address. Type in your IP Address and your Subnet Mask.
 

 
Click on the Gateway tab.



 
Enter your gateway into the New gateway field and click the Add button.
Click on the DNS Configuration tab.
 

 
Select Enable DNS.
Type 69.18.32.50 and 69.18.32.51 into the DNS Server Search Order field.
Click the OK button at the bottom of the panel.
Click OK again. Restart your computer.

Next: Set up your email

<back>